Being a porous stone, travertine stains easily. After identifying the origin of the stain, use specific products to remove it.
1. Oily stains darken the stone and should be removed with chemicals. Blot the stain with a clean cloth to remove any excess residue.
To remove the stain, use a mild, liquid household cleaner such as ammonia, acetone, or detergent. Apply the product to the stone with
a damp cloth. Place the rag over the stain to remove the oily product.
2. Organic stains, such as those caused by coffee, juice, urine, and food, turn travertine pink or brown. Eliminate them with a mixture of 12% hydrogen peroxide, one for food use, and a few drops of ammonia. Apply the product to the stone or damp cloth. Place the cloth over the organic stain to remove it.
3. The method of removing ink stains varies depending on the color of the stone. If the stain is on a light-colored stone, use bleach or hydrogen peroxide; On the other hand, if it is on a dark colored stone, it is better to use acetone or lacquer thinner. Apply the product to the stone with a damp cloth. Place the rag over the ink stain to remove it.
4. To remove water stains, buff the stain with # 0000 grade steel wool.
5. Before you can remove etch marks, you must completely remove the acid that caused them. Once the acid is removed, wet the surface and use a polishing pad to apply the marble polishing powder. Buff and polish until the marks are gone.
6. Use water to clean travertine in outdoor areas. Clean travertine installed in outdoor areas at least once a year. Rinse the stone with water to remove any excess dirt or debris. To clean travertine that is not regularly maintained, use a high-pressure water hose to remove embedded dirt.
7. Thoroughly clean and assess the integrity of the travertine twice a year. Constant exposure to water can damage travertine tile, ruin the
grout, and stimulate the production of soap scum, mold, and mildew. To keep a shower clean and structurally sound, perform a deep cleaning
and evaluation every six months.
8. Treat the walls with a soap film cleaner to remove soap scum buildup. Let the product sit for a few minutes before buffing it with a microfiber cloth.
9. Treat mold and mildew in the shower with a mild mold cleaner. After letting the product sit for a few minutes, remove the residue with a clean microfiber cloth.
10. Examine the grout for cracks and holes. If you discover that any part of the grout is missing, repair it immediately, as cracks and holes in the grout can cause further water damage. Let the repaired grout cure for 7-10 days.
11. See if there is any discoloration on the tiles. If you notice a dark tile that was once light, then it is a sign of water absorption. Apply a sealer to the shower.